high speed plastic pet container stretch blow moulding making
machine
| What is technical parameter of our bottle blowing machine? |
Bottle type specification
| cavity | 4 |
| theory output (PCS/HR) | 4000-5000 |
| Max. volume (L) | 2L |
| Bottle mouth maximum overall diameter (mm) | 28-38mm |
| Bottle biggest diameter | 100mm |
| Bottle maximum height | 330mm |
Power specifications
| Light tube quantity | 32pcs |
| Light tube power | 1.25kw |
| Maximum heating power | 40kw |
| All electric machine installation | 43kw |
| Actual consumption | 21.5kw |
Air pressure specification
| Work pressure | 7-9kg/cm2 |
| Low-pressure gas consumption | 1600Ltr/min |
| Blow bottle pressure | 25-35kg/cm2 |
| Higher -pressure gas consumption | 3000 Ltr/min |
Frozen water specification
| Work pressure | 5-6 kg/cm2 |
| Temperature range | 10°C |
| Consumption | 8000kcal/hr |
| Frozen water flow | 88Ltr/min |
Machine specification
| Size of the machine | 4.5x1.6x1.9 (m) |
| Weight of the machine | 3.5ton |
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat
by letting the bottles rotate by itself and revolute in the rails
simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms
in shapes by adjusting the light tube and the length of the
reflecting board in the preheating area, and eternal temperature in
the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each
mechanical action, which will make the procedures turn into a state
of safety in case of a breakdown in certain procedure.
| How about our after-sale service ? |
Provide whole drawing for the perform mould and bottle mould. Free charge for word design on the mould. We can help you
install the machine; from setting machine, testing, and to check
the machine is on the good working condition. There is a litter
charge, only for flight charge and accommodation.
Warranty:
We response for one year warranty for the machine, however, it without any human conduct. And provide one-year free
spare part for client.
Up 15 million shots for the bottle mould.
3 million shots for the perform mould, cap mould.
All moulds are designed by CAD/CAM.
We also can provide the drawing for the mould, help you to maintain
the mould, and machine.
