Low Pressure Piston Air Compressor 10 Bar For PET Bottle Blowing
Machine
Product introduction of low pressure piston compressor
Low pressure air compressor provides 10 bar high pressure for PET
bottle blow molding machine.
Features of low pressure compressor
1.cylindrical direct-flow valve is used by our compressors. The
valve is made from the stainless steel belt imported from Sweden
and it is free from fracture during the working life.
2.The piston of our air compressor applies the integral cast
chromium plating ring, the working life is extended by 3 to 4
times.
3.Shangair’s unique compressor dynamic balancing technology. The
vibration is only as a quarter of the world standard.
4.The whole air compressor adopts rolling bearing without bearing
shell
5.To ensure safety and reliability of air compressor, redundancy
design principle is adopted and multiple protection measures are
taken: such as overload protection; overheat protection;
phase-failure protection; low-voltage protection; drainage while
stop running; startup under the condition pressure is zero.
6.High reliability, long maintenance cycle, very low oil
consumption (oil-saving), low energy (power saving), these
dramatically reduce the general operating cost of our air
compressors.
Parameters of 10 bar compressor
| Model No. | Air Flow
(Nm3/min) | Pressure
(Mpa) | Power
(KW) | Weight
(kg) | Size (mm)
Length×Width×Height |
| W-1.3/10 | 1.3 | 1.0 | 11 | 660 | 1800×860×1600 |
| W-1.6/8 | 1.6 | 0.8 | 11 | 670 | 1800×860×1600 |
| W-1.6/10 | 1.6 | 1.0 | 15 | 680 | 1800×860×1600 |
| W-2.0/8 | 2.0 | 0.8 | 15 | 690 | 1800×860×1600 |
| W-2.0/10 | 2.0 | 1.0 | 15 | 690 | 1800×860×1600 |
